Product Introduction
GEA NT50,NT80,NT100,NT150 Frame And Plate Heat Exchanger And Gasket
Product Specifications / Features
Detailed Product Description
1. Equal to GEA NT50,NT80,NT100,NT150 plate heat exchanger.
2. Plate gasket: NBR / EPDM
3. Plate material: 316L /304/Ti material
Same as GEA NT50,NT80,NT100,NT150 gasket plate heat exchanger, can replace original GEA plates and gasket.
Material: 316L, 304, Ti, SMO, Hastelloy
Thickness: 0.5mm, 0.6mm
Gasket: NBR, EPDM
Gasket type: clip on
Applications:
District heating, district cooling, marine oil cooling, chemical, food industryCompetitive Advantages
Well and High Quality Control
GEA Heat Exchanger Material Specification:
| Material of Plate | Suited Liquid Kinds | ||
| Stainless Steel (AISI304.316 Etc) | Pure Water, Normal Water, Oil for eating, Mineral Oil | ||
| Ti, Ti-pd | Sea Water, Saline Water, Mineral Water | ||
| 20Cr, 18Ni, 6Mo (254SMO) | Dilute Sulphuric Acid, Organic Water Solution | ||
| Ni | High-temp and concentration caustic soda,sodium hydroxide | ||
| Hastelloy (C276, D205, B2G) | Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid | ||
| Material of Gasket | Operating Temperature ° C | Suited Liquid Kinds | |
| NBR | -15~+110° C | Water, Sea Water, Mineral Oil, Salinous Water | |
| HT-NBR | -15~+120° C | Water, Sea Water, Mineral Oil, Salinous Water | |
| HNBR | -15~+140ºC | High temperature mineral oil, high temperature water | |
| EPDM | -25~+160° C | Hot Water, Steam, Acid, Alkali,sodium hydroxide | |
| HEPDM | -25~+180° C | Hot water, water vapor, acid, alkali,sodium hydroxide | |
| Viton-A | -5~+160° C | Acid, Alkali Acid, alkali, fluid,sodium hydroxide | |
| Viton-G | -5~+180° C | High Concentrated Acid, Alkali, High temperature Oil, Steam | |
| GEA Technical Parameters | ||||||
| Model | Corrugation Angle | Corrugation Depth (mm) | Angle Hole Diameter (mm) | Angle Hole Center Distance (mm) | Plate Size (mm) | Area of Plate （㎡） |
| VT04 | 128° | 2.55 | φ32 | 480*61 | 550*129 | 0.04 |
| VT10 | 53°127° | 3 | φ50 | 691*118 | 780*212 | 0.1 |
| VT20 | Horizontal /Vertical 127° | 3.9 | φ79 | 868*212 | 999*337 | 0.26 |
| VT205 | 127° | 3.95 | φ78 | 869*212 | 994*339 | 0.27 |
| VT20P | 120°Vertical 138° | 3.3 | φ75 | 868*212 | 999*338 | 0.26 |
| VT40 | Horizontal/Vertical 118° | 3.9 | φ113 | 1227*257 | 1400*425 | 0.46 |
| VT40(M) | 116°117° | 3.2 | φ115 | 1227*257 | 1400*424 | 0.5 |
| VT405P | 121° | 3.3 | φ118 | 855*257 | 1027*430 | 0.32 |
| AT405 | Horizontal 118° | 3.8 | φ111 | 855*257 | 1024*429 | 0.34 |
| VT405 | Horizontal/Vertical 118° | 4 | φ117 | 855*257 | 1021*429 | 0.32 |
| VT80 | Horizontal/Vertical 117° | 3.9 | φ175 | 1526*382 | 1766*614 | 0.84 |
| VT80(M) | Horizontal/Vertical 117° | 3.2 | φ175 | 1526*382 | 1766*614 | 0.84 |
| VT2508 | Horizontal/Vertical 127° | 4 | φ450 | 1957*695 | 2492*1214 | 2 |
| NT50T | 129°Vertical 127° | 2.8 | φ56 | 371*130 | 492*246 | 0.07 |
| NT50M | 129°Vertical 127° | 2.8 | φ56 | 743*130 | 864*246 | 0.18 |
| NT50X | 129°Vertical 127° | 2.8 | φ56 | 1115*130 | 1236*246 | 0.26 |
| NT100T | Horizontal/Vertical 128° | 3 | φ110 | 707*262 | 897*445 | 0.25 |
| NT100M | Horizontal/Vertical 128° | 3 | φ110 | 1113*262 | 1303*445 | 0.44 |
| NT100X | Horizontal/Vertical 128° | 3 | φ110 | 1519*262 | 1709*445 | 0.63 |
| NT150L | Horizontal/Vertical 120° | 3.2 | φ155 | 1572*314 | 1804*541 | 0.85 |
| NT150S | Horizontal/Vertical 120° | 3.2 | φ155 | 1092*314 | 1324*541 | 0.48 |
| NT250S | Horizontal/Vertical 124° | 3.1 | φ250 | 1406*420 | 1736*745 | 0.88 |
| NT250M | Horizontal/Vertical 124° | 3.1 | φ250 | 1703*420 | 2033*745 | 1.13 |
| NT250L | Horizontal/Vertical 124° | 3.1 | φ250 | 2000*420 | 2330*745 | 1.38 |
| NT350S | Horizontal/Vertical 127° | 3 | φ348 | 1692*559 | 2140*995 | 1.2 |
| NT350M | Horizontal/Vertical 127° | 3 | φ348 | 2029*559 | 2477*995 | 1.7 |
| FA184 | 180° | 12 | φ194 | 1526*404 | 1759*665 | 0.88 |
| N40 | 180° | 5 | φ120 | 1227*257 | 1406*432 | 0.45 |
